Wired Doorbells

All wired door chime answers

Using more than 1 wired doorbell
It is possible to have 2 or more doorbells. If using battery power we do not suggest having more than 15 metres from bell push to doorbell unit.  If using transformer power then we suggest 8-12 volt transformer with 1 amp output per doorbe...
Poor / weak sound from wired doorbell / wired door chime
There might be insufficient power or too much bell wire has been used. Please check the points below: If using battery power then check the batteries are strong, good quality Alkaline or Lithium type batteries. Don't use Zinc type or rechargeable ...
Constant ringing or buzzing sound
If your wired doorbell does not stop ringing or you can hear a loud buzzing sound when connected then please check the following: For Electronic doorbells (those that play an electronic melody): Check that you are not using a lighted bell push. Remov...
How do I change the bulb in an illuminated bell push?
Firstly, the bell push wire will need to be removed from the screw connections on the bell push barrel. This is will allow easier access to the lampholder. Although illuminated pushes are available in all manner of designs, shapes and finishes, the...
Using the 776 with Ring, Nest or other WiFi doorbells
Ring, NEST and other WiFi doorbell manufacturers sometimes advertise the Byron 776 as being a compatible product. In fact this is not always the case.  The Byron 776 contains a built-in transformer with a rated output of 8V 1A AC. Providing the WiFi ...